May 2011 Archives

Fun With Buttons- Hair Pins!

May 31, 2011

hair pins.jpg

These "Coordinates" Buttons by La Mode have endless possibilities. They are stackable, fashionable and fun! With prints and textures, I thought these buttons would make great hair clips. I mixed and matched from several different sets, and left one button all by itself. These flat bobby pins come in 2 lengths and are perfect to use because of the 3/16'' wide top, so the buttons have a good surface to grasp hold to.

My first step was to stitch the top button. Stitching the entire stack together doesn't work because the thread loops on the bottom button create an uneven surface to adhere to the bobby pin.  Because you're not stitching the button TO anything, I took my needle through the thread knot, creating some leverage for sewing through the holes. Then I glued the top button to the lower button and let it sit for about 2 hours. The glue is key in this project. I used the E6000 Multi Purpose Adhesive, which is amazing!! Using a tooth pick to dip into the tube to grab some glue, place a small amount on each surface. Let dry for 1-2 minutes and then stick them together. There is minimal oozing- but what is great about this glue- considering how much you have left over oozing out of your project, you can pull the excess right off. After about 12 hours (overnight), it becomes this stretchy clear goo that can easily be pulled off without harming your project.

After letting the glued button stacks sit for about 1 hour, I glued them to the bobby pin surface. I didn't want any chance of the bobby pin gluing itself shut, so I slid the bobby pins on the card the buttons came on, so the bottom part of the bobby pin would not have to be involved. Letting each glued surface dry separately for a minute or two really helps minimize ooze and stability of placing the buttons to the pin. After about 45 minutes, I slid the bobby pin half way off the card so there would be no chance of the card being glued to my project! Let them sit that way for 24- 72 hours to cure and voila!

Kwik Sew Swimsuit

May 28, 2011


Memorial Day seems to be the official start of summer, AKA Swimsuit season. If you are anything like me, finding a swimsuit to fit your body is somewhere on the list of un-favorite things to do behind cleaning the bathroom and changing poopy diapers. One of the reasons I detest swimsuit shopping so much is that my body is not standard and is even less so since having a baby. My bust and chest ratio is not available off the rack. And if a 2 piece is not sold by the piece than that ain't happening either. I often wonder why tops are not sold in bra sizes because just because a lady is a medium across the chest does not make her a medium in cup size. And don't get me started on bottoms!

swimsuit2.jpg

Alas, we are the lucky ones because we can sew so we can custom fit and design a swimsuit to not just fit perfectly but also to highlight what we like, disguise what we don't and add any details that are hot right now. So with all this in mind, I set out to make a great suit for me and I started with Kwik Sew's Swimsuit and Wrap Pattern (KP-3330) because #1: I really liked the skirt option and #2: I thought the top would be easy to modify to fit me well. To begin I tried on all my swimsuits from past and present to see what design elements I like and which I did not. I found that the halter style gave me the support I was looking for but I liked thicker straps that those in the pattern. This was easily fixed by widening the top of the cups. Right where the top of the cup reaches 2 in. across I extended it up to make 2 in. wide and 15 in long straps. I installed the elastic as stated in the pattern but continued the hem all the way up the strap. I also made the under bust strap into a tie as well for a better fit and extended the tie 5 more inches on each side but kept the elastic the same sizes as stated in the pattern. For the bottoms I left off the waist band because I found the elastic to give a slight muffin top effect. I may modify it later with more elastic or a smaller waist band but I am still waffling. I am also considering taking the waist band and putting it on the skirt so that the skirt is removable.

swimsuit top.jpg

Now for the venting: there are few things more slippery than elastic on swimsuit fabric. It takes some practice to anticipate how it moves and where to position it on the sewing machine. I recommend using long, skinny, SHARP pins too. The long ones enabled me to keep them in the fabric until the last possible moment and then pull them out so my fabric would stay together. Because and try on your top as you make it. The darts can be tricky, if you don't curve them a bit you will end up with points, which is not a good look. You want a cup shape not a cone. Also, you will need a walking foot, a seam ripper, patience and a good drink (coffee or wine, depending on the time of day). The drink is for when you are just about to hurl your project out the window, take a drink and a deep breath and get back to work. It is worth it in the end to avoid dressing room lights and look good at the pool.

UPDATED:

KS swimsuit2.jpg

KS swimsuit.jpg

I have made the skirt and added the waist band to my bottoms. I recommend both but without the waist elastic. I originally had the elastic in my waist band as instructed in the pattern but it definitely gave a muffin top appearance and I feared I would have to suck in the whole time at the pool. So I ripped the waist band off and took out the elastic and it looks so much better and works just fine. This suit has been pool tested with a 2 yr old and it stays in place and looks great. I love the skirt: it is just long enough to add coverage without looking old fashioned. 

To answer Anns question- There is no elastic at the top of the bottoms without the skirt as pictured above, only a fold over and then zig zag stitch. I don't think you need the elastic but if it sits too low or you want added insurance, add the waist band. It looks great and stays in place without elastic. You could definitely make the band wider to create more of a hipster look or more tummy coverage but I think you will see from the skirt picture that it does come up quite a bit so try it as is first with your muslin and then adjust as needed.   

Fabric used above is Swimsuit/active wear fabric in Royal Blue

The Fabric Mavericks says "It is time to serve your Nation''

As Memorial Day approaches, many people are anticipating the end of school, the opening of the swimming pool, a day off from work and even the unofficial beginning of summer.  Unfortunately, many of us will not even think of the real reason behind Memorial Day- the people in our military who serve and have served our nation in peace and war.

Let me introduce you to the Quilts of Valor Foundation. The purpose of the Quilts of Valor Foundation is to ensure that all members of the armed services and veterans receive a patriotic quilt called a Quilt of Valor. This organization is not about politics; it about people.  Several quilting manufacturers have banded together to create special collections to celebrate these courageous people- Moda Fabics, Marcus Brothers, P&B Textiles, Timeless Treasures, Red Rooster, Windham Fabrics, Clothworks Textiles, Andover Fabrics and Quilting Treasures.  Each of these comp­­anies has created a free quilt download showcasing their fabrics. All of them are gorgeous.

I am challenging all of my sewing friends to make a patriotic quilt this summer. I know that we are all busy so if you cannot make a quilt top, how about a block?  I am challenging you all to make one block.  I have again talked Victoria into helping us out.  Send your block to Victoria Bryant c/o Fabric.com, 2151 Northwest Pkwy, Marietta, GA 30067, we will assemble all the blocks we receive into patriotic quilts to be submitted to the QOVF.  Don't know where to begin? If you cannot find a block, check out these free blocks at Persimmon Quilts.

1.       Raid your stash for good quality red, white and blue fabrics or select some of our great fabrics from the Quilts of Valor section.

2.       Prewash your fabrics.

3.       Select a block pattern- your own favorite block, design your own or select one of the great blocks from Persimmon Quilts ( preferably a 12 1/2'' block).

4.       Sew block according to your instructions.  Unfinished size should be 12 ½''.

5.       Sign your block with your name using a permanent marker.

6.       Send your block in a small plastic bag to Victoria Bryant c/o Fabric.com, 2151 Northwest Pkwy, Marietta, GA 30067. Please include your email address, so we can thank you. If you have any questions, please contact Victoria at victoria@fabric.com.

 

When we receive enough blocks, we will assemble the tops and show the top or tops in a future blog.

 

If you want to make a quilt top yourself, here are the basic requirements requested by the QOVF:

Overview of QOV Process

Home :: Overview of QOV Process

Overview of the QOV Process

 

Contact Information:
Phone: (202) 755-7683
  Email:
info@QOVF.org

The making of the QOV typically involves team work.  There is the person who pieces the top and backing and then there is the machine quilter who quilts it.  Below is a quick overview for this QOV team.  You can click on links to get more information.

Overview of QOV process for Quilt-topper

1.    Choose good quality 100% cotton quilting fabric appropriate for an adult.

2.    Pick a pattern.

3.    Start your documenting of making this quilt by taking pictures and writing.

4.    Finished size should be no smaller than 55" by 65" or larger than 72" by 90".  

5.    Make a backing that exceeds at least 3" of the top on ALL sides. (Same as total of 6-8" longer and 6-8"wider.

6.    Request a volunteer longarm quilter through the website.

7.    COMMUNICATE with your partner.  Determine who will make presentation case, label, do binding, request final destination.

8.    Make a presentation case.

9.    Prepare a label.

10.  Bind and label the completed quilt.

11.  Write a note, card, letter or have your journal ready to send the recipient.

12.  Wash the quilt.

13.  Request a destination.

14.  Communicate with longarmer as to whom/where/when your QOV was sent/awarded.

 

Overview of QOV process for Longarmer

1.    Once you make contact with your QOV quilt-topper partner, figure out who will do binding, label, presentation case and get final destination.

2.    Let your topper know what your requirements are for the backing.  How many inches larger than the top do you need?

3.    If you'll do the binding, request the amount of fabric you'll need.

4.    COMMUNICATE with your partner.

5.    Give your topper a rough guestimate of how long it will take you to finish your portion.

6.    Once you receive the quilt top/backing, let your topper know it arrived safely!

7.    Use quality batting.

8.    If you go beyond 30 days time limit, let your quilt-topper and Longarm Coordinator know this. 

9.    If one of life's curve balls comes your way, let your partner and Longarm Coordinator know this so that the quilt can be sent to another longarmer.  Life happens.  We have learned that you dig a deeper hole by doing nothing hoping things will automatically remedy themselves.

Check out the Quilt of Valor Foundation website for additional information.

Please check out the videos and podcasts to find out how much these quilts mean to the recipients and to the people who make these quilts. I was especially touched by the podcast where 3 young boys make Quilts of Valor for veterans. 

Now we should continue our Memorial Day celebration. Here is an adult drink from Quilter's Home: 

The Giddy Piecer

1/2 ounce freshly squeezed lime juice 

1/2 ounce limocello

1 1/2 ounce vodka

2-3 ounces Ruby Red grapefruit juice

Fill a shaker with crushed ice and add the above ingredients. Shake well and pour into a chiiled glass.

Or try

a good old fashioned lemonade. Remember do not drink and sew!

Enjoy!

Knitting: Dropping a Stitch on Purpose

May 26, 2011

drop st.jpg

Among the more interesting and yet challenging knitting stitches is the dropped stitch. It is no interesting because of the ladder effect it creates. I deem it challenging because dropping a stitch is ingrained into a knitter's head from birth as a central wrong and big mistake, yet here we ask you to do it with alacrity. However, like most knitting techniques we have explored here, it just takes a bit of courage (just a teeny bit), some hope, and practice.

Vertical Dropped Stitches (vertical ladders):

The vertical dropped stitch is the easiest but also the most cringe worthy. Your first row is your foundation and insurance that your dropped stitches won't go wrong. I cast on 20 Sts. My first row was a purl row so my increases were Purl into the front and back (Pf&b). Your vertical ladders will trade places with the 'b' of the Pf&b.  
Foundation Row (wrong side): P 1, Pf&b, *P4, Pf&b; repeat to last 3 sts, P3.

drop st v3.JPG

drop st v4.JPG

drop st v2.jpg

drop st v1.jpg

Continue in Stockinette until your piece is as long as you like but before you bind off, on the wrong side: P2, drop 1, *P5, drop 1; repeat to last 3 sts, P3. Bind off. Pull out your dropped stitches all the way down to the cast on row. Don't worry because you are pulling out an increase the cast on row will be secured by the original stitches.

Horizontal Dropped Stitches (horizontal ladders):

Horizontal stitches are also dropped increase but they are created and dropped with every 2 rows, not just at the foundation.

drop st h1.jpg

drop st h3.jpg

drop st h2.JPG

Cast on 20 Sts.

R1: *K1, Yo (twice); repeat to last st, k1

R2: *K1, drop both yarn overs; repeat to last st, k1

R3& 4: knit

Repeat row 1-4 until piece is desired length. The ladders are created by the dropped double yo and create stripes of dropped stitches.

Experiment with your own dropped stitch pattern. The created airy design is perfect for warm weather projects. Worked in simple linen or cotton blends will not only add a touch of color and softness but also add texture to a simple summer dress.  

Liberty of London in 1 yard!

May 25, 2011

Cami4.jpg

Liberty of London- Just say it out loud. It just sounds like great fabric. Saying that words bring pictures of English countryside, blooming flowers, tea heavy in the air and double-decker buses. Saying the name "Liberty of London" makes me want to sew. And sew I have. I was given 2 yards of Liberty of London Lawn Pepper Green (one of our MANY gorgeous prints from Liberty of London) as soon as it arrived in our shop and told to make something great but try to keep the project small and fun. Well, that was no problem given that it is spring, almost summer. I decided on 2 projects to show the variety of Liberty. These prints are perfect for wee people as well as adults and it is perfect for warm weather.

Cami3.jpg

My first project was the trickiest because I wanted a sleeveless shirt but nothing with too much detail to compete with the print of the fabric. I sorted through the Fabric.com pattern catalog but didn't find anything I loved! Well, I became sidetracked with a personal project of making new PJs for myself and found the pattern that was perfect for the Liberty of London. It is HotPatterns Cupid Cami (And it's a free pattern download!). Originally designed as a PJ top, I didn't see why with a fabric substitution it would not make the most wonderful summer top. I love being right. With some Hanky Weight Linen as my bias tape, this cami took approx 1 yard of Liberty of London (you are safe with just ordering 1 yd) and about 2-3 hours to complete (having had to make the bias tape). I did have to add darts of 4 in. long by 1 in. wide at the bust but that was my only modification. This top is easy to make and can be easily modified for a longer length; it hit right at my hips. The ties at the top are so much fun and make me feel like a kid again. I do recommend that when you sew the front to the back that you start at the bottom when matching up the sides. If you start at the top, it will not match up once you get to the bottom. Once you sew the seam, it will all work out.

FG5.jpg

FG.jpg

My second project also took approx 1 yd and came from Heather Ross Weekend Sewing. I have made the Flower Girl before and know it runs a little small so I made the size 4 for my 2 yr old; I want her to have it for several summers. This print really brought out something in this pattern that the other dress did not have. The Liberty of London print sort of 'fits' this pattern like no other fabric. The Flower Girl dress also went to together super quick, 2 hours or so. I cut my skirt length to 20 in. to make it longer like in the book photograph. The other modifications were to topstitch the gathers in place once I had pressed the bodice seam towards the skirt and I made the straps a bit wider at 1.5 in. I think even a bit wider than that would still look great. You could even get away with some flat piping where the bodice and skirt meet. You could not ask for a better combination of dress and print for little girls.

FG4.jpg

The flow and drape of the Liberty of London Lawn is light and delicate with an airiness that will be most welcome come the balmy days of summer. The print reminds me of my childhood, of picnics and climbing trees. You can't beat the soft hand or bright colors; this is a fabric that needs to be in your closet. 

Video - Cotton Quilting Printed Fabrics

May 24, 2011

List_Parisville.jpgIf you've seen any of the videos about cotton prints over the last year, you know I love to wear them more that I like to quilt with them. The video today explains a little more about why most cotton prints/quilting cotton prints are perfect for apparel and even some home decor applications like table linens, pillows and even duvet covers. Anything you find in the Quilting category is printed on cotton broadcloth. Some fabrics may be a little more closely woven than other, or have a teatment on them to give you a softer hand, but that fabric is mostly the same. The differences will be between brands like Westminster, Moda, etc.

We literally have thousands of prints to choose from whether you are sewing for a baby boy, a tween or yourself. Summer is the best time to try a project with a cotton print because the fabric is perfect for the season. Keep in mind, as I always say, if you don't like a little light ironing or a slightly rumpled look, this fabric may not be for you. It's hard to beat the cool factor, especially down here in the Beautiful South.

Here are some pattern suggestions to go along with the Parisville collection I featured in the video by Tula Pink.

SDG-109

SDG-95

FT-023

Infinity Dress in ITY Knit

May 20, 2011

inifinty4.jpg

Infinity dresses are everywhere these days; a call back from their heyday in the 1970's. And why not! They are classics and modern perfectly combined because you can wear them to suit your style, event or mood. Couple that with Fabric.com's amazing selection of dreamy Stretch ITY knits and your infinity dress can be in a rainbow of colors or lengths (Mine is in turquoise). The infinity dress is perfect for holiday weekends or destination weddings because it is wrinkle free and ready to wear in seconds.

inifinty3.jpg

There are many different versions in stores these days but some lacked pizzazz or included too much pizzazz. I originally fell in love with the original on Rostitchery's blog but I had trouble with cutting the circle skirt. Rowena of Rostitchery wrote another version with some great additions for Threads Quick Stuff to Sew that included an easier version of the circle skirt and a small elastic casing (among other great tips) but I still didn't want to deal with Pi or a circle skirt so I developed my own work around : a gathered skirt. What I really loved about the gathered skirt- besides not cutting out a circle- is the ease of hemming, no round hems here! Here's how to make an infinity dress like mine.

Materials:

4 yds of ITY Knit

Coordinating thread

1 yd of ½ in. elastic

Measuring tapes of various mediums (seamstress, carpenter's and a solid ruler)

*Always use a narrow zig-zag stitch unless otherwise noted

Measure out your 2 straps which will be 1.5 times your height. I am 5'7" so I rounded to 8ft long for my straps. The width is roughly from your breast bone to under your arm. I measured  11 in. So I cut 2 straps 8 ft long and 11 in. wide. The skirt piece is double your natural waist (mine is 28 in. so I cut mine to 60 in. to make it easy) for the width by however long you want your dress to be. I decided on a  36 in. length and it hits right at my ankle (perfect for dancing). The casing piece is your waist plus 2 in by 2.5 in.

inifinty2.jpg

With right sides together sew up the side seam of the skirt piece. Baste 2 lines of stitches along the top and pull the bobbin thread to gather up the skirt until it equals your waist measurement. Stitch the gathers in place. With right sides facing, pin your straps onto your skirt with the seam in the back, fold your casing widthwise and pin to your skirt over the straps, overlapping the ends by 1-2 in. Stitch all these layers in place. Insert your elastic into your casing, making sure not to twist and then stitch the ends of your elastic together and then close and stitch your casing ends (I just tucked one end into the other and stitched over top of the ends. Voila you are done.

inifinty1.jpg

Now there are tons of videos on how to wear and wrap infinity dresses on YouTube. But there are also many ways to fancy up your dress as well. You can add a simple ruffle like my Michael Miller Knit post or add many ruffles to your skirt. You can make your dress in white and dye it in an ombre design. You can make your skirt and straps to coordinate but not match. Some designs even feature a built in tube top (just an extension of the waist casing) or a separate tube top for extras modesty or with a built in bra. The possibilities are endless but this is the PERFECT summer dress!

Lion Brand Irish Lace Caplet in Cotton Ease

May 18, 2011


My first big crochet project and I am feeling pretty good about it. I have been drooling over the Irish Lace Scarf pattern (Nicky Epstein for Lion Brand) ever since Fabric.com featured it as a thumbnail for our Yarn Section. This is a great pattern for beginners. It is still a little tricky but a good way to expand your crochet knowledge. I had stumbled a bit on the scarf with the last stitch of each row's placement but with some experimentation decided to stitch into the spaces for the last stitches instead of the chain as the pattern states. I also had trouble with the Roses. Crochet seems to be more 3D than knitting which I think of as more back and forth and if you want to build you must go back and pick up stitches. But this is not the case with crochet; you can just as easily build out as you can back and forth. When the Rose Pattern called for 'working behind' rows I was stumped. No- I was beyond stumped. As a knitter I could not see how it was possible. However, with the help of this fine video I was able to see through my ignorance and work out the Rose.

Irish6.jpg
I hooked mine in Lion Brand Cotton Ease Terracotta (2 skeins) and made it into a caplet to wear to spring/summer weddings or as a chic addition for a chilly date-night. Here's the low down to make one just like mine. First, I shortened the pattern from 57 in. to about 28-30 in. I also added the picot edge to only 3 sides. After making my first Rose, I loved the look so much without the center than I decided against crocheting the centers. I also opted out of the leaves since I was going for a caplet instead of a scarf so I wanted fewer additions so as not to compete with my dress and to make the lace detail stand out. Since I was crocheting this out of cotton, I was also concerned about too much weight so that was another reason to nix the added leaves. I added the ties by SC a slip knot on to the top corners and then chaining about 20 chains (or 6 in. length). The Roses are joined on with slip stitches to the upper corners of each end.

irish4.jpg
You can wear yours a little looser for a sultry off the shoulderlook to wear with a strapless dress or one shoulder number or a little tighter for a tailored fit to wear with a cap sleeve or spaghetti strap outfit. I recommend this pattern to beginners and advanced like because it is FUN and coupled with the color selection of Cotton Ease you are sure to find a color to match every event. Oh and I also recommend the Cystalite hooks, which I used and were smooth and dreamy!

Irish5.jpg

Video - Cotton Lawn

Our video subject today is Cotton Lawn fabric. We are very excited to offer the queen of the Cotton Lawn world, List_liberty%20of%20london.jpgLiberty of London Tana Lawn. Lawn is a finely woven cotton fabric that is semi-sheer and almost silky to the touch. It is perfect for warm weather clothing, for sleepwear and lingerie. We have some pattern suggestions for you to consider when you are shopping for Cotton Lawn fabric. We hope the video helps bring this luxurious cotton fabric to life!

Pattern suggestions from the video:

KP-2811

KP-2767

KP-3675

FT-033

Crochet: Magic Circle

May 16, 2011

MC1.jpg

Don't you just love magic? When I was a kid magic was a sure-fire way to get my attention. Now that I am grown (well, taller really.) I am still a sucker for magic. Like Magic Loop is to knitting, Magic Circle is to crochet and it is equally as glorious. When I was just starting out with crochet, I remember trying and trying to crochet into my chain to make a small circle and it eluded me over and over again. Had I had this trick up my sleeve from the beginning, I would have been much happier making my Easter Eggs and Best Bunny. Not only is Magic Circle an excellent beginning to Amigurumi but also for flowers, hats and round motif-based afghans.

MC2.JPG

Magic Circle is a little tricky for beginners, especially if you are transitioning from holding your yarn in your right hand to your left. I have found a super video that really walks you through Magic Circle including some pretty sweet slow motion for extra handholding that beginners need (me, me!). Once you get the hang of it, Magic circle is really easy and so nice. It is basically crocheting into a slip knot that is not knotted but tightened after you have crocheted your chain into the slip knot. It is really brilliant!

MC3.JPG

I have been using it to practice all my crochet stitches, sometimes making something pretty, often times it resembles more of a slightly organized tangle of yarn. However, I am getting better with the yarn/hand switch and also making progress on my next project the Irish Rose Scarf by Nicky Epstein for Lion Brand. It is a neat scarf that is easy and I can't wait to share it. The Magic Circle was integral in helping me with the roses.

MC4.jpg

You can find sneak peeks of my projects on twitter by following @tdangermiller

 

Bridal Project - Follow Along Part 3: The Wonder of Under

Sometimes, what's under the dress is just as important than the dress itself.

As you may remember from our last post on Carole's wedding dress, the bride had decided she would like the waist to sit just a little lower.

Carole purchased a foundation garment to wear under her dress, but the bodice wasn't sitting properly on her torso. Because her hips sit a little high in the back, the dress was riding up oddly in the back of the waist. The foundation garment she brought to her fitting sucked things in, but it distributed her weight in a way that did not work with the dress style she wanted.

We wrestled with a few options, but nothing was quite right. Then, on a whim, I had her try on a Victorian corset I had in my collection. The upper part of the corset was completely inappropriate for her gown, but I wanted to test it just to see if steel boning would help matters. Lo and behold, the back of the dress settled right into place, and a plan was hatched: The foundation garment Carole bought was getting the steel boning treatment.

A note on steel versus plastic boning: Plastic boning certainly has its place, and I use it in many applications. However, if a situation calls for a more unyielding support, steel is the way to go in my opinion. As the wearer's body heats up, plastic tends to mold to the body's shape, so it loses its ability to really create a firm line. Steel will curve slightly to the body's contours, but it retains its rigid nature and keeps everything sitting pretty.

I ordered an assortment of steel bones and started cutting bias strips to make casings. Once I had all my supplies in hand, I measured out my strips and stitched them into the foundation. The bones slid in like butter, and voila! A better fitting dress!


Here are a few snaps of the process -- you'll see it's very easy to make this alteration.


Cutting the bias strips. I used muslin I had on hand.

Corsetify-1.jpg
The bones have arrived! I ordered mine from a corset supplier.

Corsetify-3.jpg
The victim/foundation garment.

Corsetify-2.jpg
Casings stitched down, boning slid into place. I didn't close the tops initially, so we could remove any bones if they proved problematic.
Corsetify-4.jpg
Not the most beautiful fix there ever was, but it reshaped the situation to suit our needs. I could have folded the bias strips to make for cleaner interior lines, but the stretch nylon the original garment was made of did not enjoy being stitched to a double layer of muslin, so I abandoned that approach.

Next up: beading!

Embroidered Home Dec. Pillow

May 13, 2011

IMG_20110513_125247.jpg

One of the keys to making a house a home is dedication to details. Whether this is spray-painting a lamp the perfect shade of green to accent your dining room or picking out trim to really finish off your drapes in the bedroom, details can take a room from 'Blah' to 'WOW'. Adding details to unexpected places is also another way to make a room special. One of my favorite details in home decorating is embroidery. It is a simple, colorful and unexpected way to add an extraordinary touch to a home dec. project.

IMG_20110513_125313.jpg

I have been really blown away by the pillows, lamp shades and throws in blogland, so I decided to try my own to spice my sort-of boring green couch. It came with some standard matchy-matchy pillows that are too contemporary for my taste. Deciding on some of the totally hip Dwell Studio Blossom fabric that I have previously used in my Amy Butler Style Stitches Post, I thought the colors would really work in my living room which is heavily blue. But I wanted to add some color accents to make the pillow pop but also to add some texture. Not wanting too much of a good thing I decided to embroider three accents in three different colors. Making the bird the center focus of the pillow as well as one of the blossoms and a small cluster of berries was my plan. Using simple stitches such as back stitch and French knot, I was able to fill in some color in little bits without overdoing it. I called on my knowledge from Sublime Stitching and my invisible zipper post.

IMG_20110513_125307.jpg

Sometimes it was just an outline of the bird to make it stand out or adding french knots and fill stitches to the berries to fill in some color, the trick was not to overdo it and add color everywhere. The fabric was already amazing; I just want to make it special and mine. This is a great beginner's embroidery project since the overall pattern will distract from any mistakes and it is basically coloring in the lines. Even more the advanced will enjoy adding their gift all over the house.     

IMG_20110513_125256.jpg

Psst. There is a sneak peek at my May Free Knitting Pattern Download project above!

Knitting How to: Picot Bind Off

May 11, 2011

picot BO.JPG

Binding off is not just a utilitarian knitting technique but can also be a beautiful stitch itself. One of my favorite lovely bind-offs is the Picot Bind-off. Not only is the Picot BO (Bind-off) gorgeous but very versatile in terms of style and drama. You can add a dainty detail to your knitting or a big, bold sign-off should you project dictate. Picot BOs are very easy too. It is merely a matter of casting on and casting off. Here's how.

I start off my Picot Bo by knitting 2 sts and then binding one off. Next, I break into the Picot BO. Using the cable cast on, cast on 2 sts and then bind off 4 sts. Repeat till all your stitches are bound off. If you desire a bigger picot cast on more stitch but remember to bind off twice the number of sts cast on. This means if you cast on 4 sts, you will bind off 8 sts, cast on 6 sts, you will bind off 12 sts for each picot tip. It is easiest to deal in even numbers. Should you be a visual learner try my handy video which demonstrates a 4 sts Picot Bind off in Lion Brand Recycled Cotton in Sunshine


Hot Patterns Sporty Sarong-Short Free Pattern Download

From Hot Patterns, this Sporty Sarong-Short free pattern is awesome! The garment has the appearance of a skirt, comfort of shorts, and cute tie accent in front.  I was a little hesitant of the "skort" aspect myself... but, really... what a practical garment! These are fashion-forward modern skorts. And I love them.  Choose a printed fabric to make them, and you won't even be able to tell they are actually shorts; great for dressing up or dressing down!

ShanShorts.jpg

The cut of the pattern is marvelous, and so easy to put together! I chose the rayon challis print from the Style Studio collection. Challis is a dream to work with, and the drape is perfect for this style of garment. You want something with some flow and drape to it. Also try voile, linen or peachskin! For my next project I want to combine this pattern with a top pattern and attach the two to make these into a sporty sarong-short romper!

Laminated Cotton Placemats: Working Without Pins

May 9, 2011

In preparing my home for spring and summer, I wanted to liven up my kitchen table. I decided to do this with making reversible, mix and match place mats. What better fabric to use for this than laminated cottons. They come in a variety of fun prints from some of my favorite textile designers, and all you have to do is wipe them clean.  

laminated table.jpg

As I was working with the laminates, I discovered that not all laminates are created equally. Some are much heavier than others. For example, I had some laminates from the Moda Central Park collection. These laminates were very heavy weight. The laminated cottons I had from Free Spirit are softer and lighter weight. When picking your laminates from Fabric.com, make sure you read the descriptions for weight information. I cut a simple rectangle shape: 21'' x 16 ¼'', then rounded the edges (optional of course).Making the placemats reversible, I just paired the opposite weight laminates together, no problem.  

Here's the problem... pins. Once you poke through laminated cotton with a pin or a needle. That hole is there. And it's not going away. Ever. So I realized I had to do this project WITHOUT pins. This involves some strategic maneuvering with your hands as you sew. As you can see, I marked clearly where I was to sew and tightly held my fabrics together as I sewed around the placemat. This almost worked out better than I expected! Sew carefully, constantly aware of your grip, and there should be no warping.


laminates sewing table mats1.jpg

Because of the thickness of the laminates, I did a 1 ¼'' seam allowance, and then graded the seam to eliminate bulk around the seams. I then clipped notches on the rounded corners to they would lay nice and round and flat when I flipped it. I left a 7- 8'' opening on one side in order to flip it. The most maneuvering done with the project is flipping the placemat right side out. Be careful! And it's ok if you pop a few stitches by the opening, top-stitching solves that later.


laminates clipping.jpg

I used double sided basting tape to temporarily seal the opening after my mat was flipped. Because pins can't be involved in this project, this double sided basting tape is perfect! You can find double sided basting tape at your local hobby and sewing store. Once you place the tape where you want, you then peel the top liner off, and then press your seam together.

laminates sticky.jpg
Because of the thickness of the mats, and the durability required of them, I used this Coats & Clark Outdoor thread to top-stitch and finish my mats! Voila!  

Oliver + S Sunday Brunch Jacket in Home Dec Fabric

May 6, 2011

brunch4.jpg

Add another one to my "Love" column; Oliver + S's Sunday Brunch Jacket is a must have for your kid's wardrobe. #1 (and you readers know that this is always #1 for me) It was a fast project. As adorable and fabulous as this jacket looks on the envelope, one would think it would be difficult or time consuming at the least. Neither is true. This is an easy pattern and really took half as long as I originally banked. There are not that many pattern pieces (this equals limited cutting) and the instructions were pie. I really loved this pattern.

brunch3.jpg

I also love how casually dressy (AKA- comfy fancy) it is. My daughter has plenty of the typical toddler jackets which are mostly cotton or a cotton/poly blend in generic primary colors or uber-girl colors with a hood and zipper. They are great for play (especially with her affinity for puddles) but I can't throw one of those jackets one over a cute dress for a birthday party, holiday dinner or anywhere nice we need to go. And sometimes I just do want something nicer than the norm but still comfy for her. My 2 yr old shouldn't know the difference between a regular jacket and a nice jacket and luckily with this pattern all of the above it true. I can make this pattern in just about any fabric and it is still nice but still washable and comfy for her.

brunch1.jpg

Now for the Mods: I limited my modifications for this pattern today since I was focusing on the use of Home Dec fabric for the jacket. This Amy Butler Love print is so bright and fun that I thought it was perfect for a kid's jacket. It doesn't hurt that now she and I can match, should we choose. The 100% Cotton has a soft hand and forgiving pattern. I did not add cuffs since I made the 3T size and I wanted to make it easy to let out the sleeves when the time comes. I also did not interface since I was using a heavier weight fabric. I would suggest finishing the seams with bias tape as you go not when the instructions call for it. If you follow the instructions you will be adding bias tape to seams that have already been edge stitched and that is tricky. I suggest finishing with bias tape first then edge stitching. Also, I suggest the Riley Blake buttons since they are CUTE and perfect for this jacket.

brunch2.jpg

I can't wait to make the skirt but I will opt for a navy solid or navy with mini dots instead of matching it to the jacket. This jacket will make its debut Sunday on Mother's day. I can't wait to button those buttons and escort her around in her new jacket! I also recommend trying the jacket in Denim, Linen or Seersucker.

You can follow my projects on twitter @tdangermiller and follow @fabricdotcom for scoops and deals!

Free Knitting Pattern Download- Beach Pillow

May 4, 2011

IMG_20110420_131455 copy.jpg

Summer is almost here and I, especially, am eagerly awaiting the opening of the pool, first day on the lake or our first beach trip. I love to lounge by the water and read a good book. However, I always forget to bring a pillow. Who would remember something like that when you already have your tote stuffed full of towels, cover-ups and swimsuits. Well, I decided to knit up a Beach Pillow to serve as storage for a towel or cover-up so it won't be forgetten (and fits easily in your bag). Use the Beach Pillow by the pool, lake or ocean when it's time for some reading or a well earned nap.

IMG_20110420_131541 copy.jpg

The perfect beach or pool companion, this knitted mesh pillow cover is made to be stuffed with your beach towel, cover-up or discarded swimsuits. One side is mesh lace to allow for moisture wicking and breathability so you can store your wet towels or swim suits after a long day frolicking in the water or for a cool place to rest your head as you watch the kids splash about.

DSC_0227 copy.jpgI use mine to keep cool so I stuff my Beach pillow with my wet towel and settle in with my summer read while hubby takes his turn with the little ones in the pool. The Beach Pillow is also a good place to toss your wet swimsuits when the day is done. The cotton yarn will absorb the moisture without distributing it throughout your tote. The cotton plus mesh will also deter mildew. The Beach Pillow Cover is also a great way to carry your towels to and from. It will keep them neat, dry and easy for the kids to carry around. Beware of pillow fights on the walk to the beach!

The Beach Pillow Cover is also a great beach knit, download your copy of the pattern today! The Beach Pillow shown above is knit in Lion Brand Recycled Cotton in Sunshine

  

VIDEO - Kristl discusses Eco vs. Organic

May 3, 2011

We have had many conversations around the fabric.com offices about the difference between eco-friendly fabrics and List_Tropical%20Hemp%20Cotton.jpgorganic fabrics. Questions arise like, ''Are organic fabrics also eco-friendly fabrics?'' and so on. The video today discusses the difference and highlights a couple of home decor fabrics. Tropical Hemp/Cotton is an eco-friendly fabric because it is partially made from hemp fiber. Hemp is considered a sustainable fiber in that it is replenish-able. Terra Organic Cotton Canvas is a certified organic fabric made with cotton grown organically in the USA. You can find many other organic and eco-friendly fabrics on our website. Here are the patterns I mentioned in the video:
FT-048
SWP-032

Feltworks Learn Needle Felting Kit

May 2, 2011

wand.jpg

Never have I felt an adrenaline rush from crafting before but there is something about vigorously stabbing felt with a needle over and over that gives a rush that no other craft can. Needle felting is good therapy  for moms, young ladies planning wedding or teens with angst (or just people in general but it is more fun to name off random identifiers). I never would have pegged myself as an enjoyer of needle felt because I love ready-made felt so much. Just as I have no desire to spin yarn but I do love yarn, I never desired to make the felt that I loved so much. However, when I stumbled across Felt works Learn Needle Felting Kit, I thought "Why not. It's for the blog."

felting4.jpg

Well, it was fun! And worth the effort (effort it is too). Needle felting is very easy to pick up, especially if you watch one of the Clover videos (We carry all the Clover tools you will need). The kit comes with all you need to make the project pictured but if you are really into it buy the supplies separate (Needle mat, needle felting tool). Not that the supplies that come with the kit aren't great but you only get 2 needles (fine for small project like this one but not for bigger) and the foam supplied isn't going to last more than 2 projects. Mine was sort of malformed and lumpy when I got done with my appliqué. But you can use the needles on other projects and you get PLENTY of wool roving.

felting3.jpg

felting2.jpg

felting1.jpg

This flower project is very simple and I caught on thanks to the Clover videos. I started with tiny bit but then learned how to judge how much roving I needed and where. Sometimes it helped to roll the roving up into a log or a ball to get into tight areas. Also, you initially hold down the roving but only 1-2 jabs with the needle will hold it in place so you don't have to constantly worry about stabbing yourself (NOT good therapy). In all it took about 30-45 min to finish this project but I felt so relaxed and myself afterward. I have since found other applications for needle felting: on crocheted eggs, over at Craftzine, and Betz White. I hope you enjoy needle felting as much as I do and don't forget to share your project on our Facebook Wall or on twitter.    

P.S. The Feltworks kit suggests using your flower as a pocket or an appliqué. I opted for the appliqué and crafted up a wand with fabric scraps instead of ribbons. It is adorable!

About this Archive

This page is an archive of entries from May 2011 listed from newest to oldest.

April 2011 is the previous archive.

June 2011 is the next archive.

Find recent content on the main index or look in the archives to find all content.