PLAID's Simply Screen- Silk Screen
February 18, 2011
Part of my usual call of duty each month is to surf the Fabric.com website looking for interesting products to feature on the blog. This is a thankless task that I am loath to perform but alas it must be done and done by me. Upon my perusal for February's Blog calendar I stumbled upon PLAID Simply Screen- an at home silk screen craft that looked like tons of fun. It was! I am now a fully fledged silk screen fanatic. I could not wait to get started on this project and if you will notice from one of my pictures that I rose early and held off my excitement long enough (just!) to brew a pot of coffee. Silk screening with Simply Screen was easy and really fun but some tips are needed.
1) Wash and iron your item first. I just washed mine and didn't think to iron because I pulled said items (1 women's t-shirt, 1 toddler onesie, 1 cotton pillowcase) fresh from the dryer. However, ironing is needed. You want your item to be perfectly flat and wrinkle free. Paint can gather in the wrinkles or areas can be missing due to small wrinkles. You also will want a nice flat surface to lay your screen.
2) Use painter's tape. The directions call for it but I wanted to stress this. This is an important step. You don't want your screen to jump in the midst of your work. The tape also can serve as a guide for your paint line. Put your tape just outside the screen area and then don't go over the tape with your paint line.
3) Apply a good bit of paint. My first shot I just applied the paint nice and slow but you want to allow the paint to build up so your line is really think. Think: apply paint allow the drop to build up and then move your paint bottle a little and repeat.
4) Use pressure. When you are using the paint applicator use a good bit of pressure. You really want to push your paint through the screen. It is not enough to just glide the applicator over the screen; you need to use some pressure. Otherwise you will get light spots or parts of the design will have no paint. You can see this in some of my pictures as I was learning a good technique.
5) If you want to layer your designs, wait at least 12 hours before overlapping. I wanted to do a row of one design across the edge of a pillowcase. I did every other tile and then waited 12 hours to fill in the rest.
TrackBack URL: https://blog.fabric.com/cgi-bin/mt5/mt-tb.cgi/4326