« Rowan Kidsilk Haze | Home | Sweater Surgery »

The Costume Trunk: The Witching Hour

September 24, 2010


panels 21755.jpg


I call this blog entry "The Witching Hour" because that's about as long as it takes to put one of the new free Hot Patterns Good Witch/Bad Witch hats together. Any good costume trunk needs a witch hat. My trunk has... a number I'm not entirely comfortable disclosing. (Truth be told, I have no idea how many witch hats I have.)

This pattern gets an A+ in the fun department. I love, love, LOVE it! I couldn't stop myself from making hats! It's a fantastic project to burn through scraps of fancy fabrics that you couldn't bear to toss, and it's also a great way to experiment with new fabrics.

I won't re-write the instructions for making the hats - the free pattern has got you covered there. I will give you my tips and insights, and a photo series of the making of one of the smaller hats.

Here are my tips/thoughts:

-          -For the large hat, which I made using a home dec velvet from my stash, I found that to make the crumples sit the way I liked them, it took a little bit of hand stitching to tack things into position.

-          -The smaller hats do require a bit of patience when affixing the body of the hat to the brim. This is especially true when working with vinyl. (The trim on the pink sparkle vinyl hat is there to hide some atrocious stitching crimes.) It just comes with the territory when you're working with small items.

-          -After making several of the smaller hats true to pattern, I found myself wanting some variation, so I cut the next several with straight bodies instead of crumple bodies. To do this, I just traced the outline of the lower edge of the original pattern and used that as the base of my triangular straight pieces.

-          -I didn't want to purchase a bazillion headbands for all my hats, so instead, I stitched elastic onto circles of fabric to create a channel, and then glued the circles to the bases of the hats (in the photos below, you can see the underside of one of the smaller hats to clarify what I'm talking about). This way, the small hats are interchangeable on one headband.

-          -The smaller hats would make darling table centerpieces for a Halloween party. They're also so quick to whip up that if you're having a smallish party, you could make them as party favors. You'd surely be known in your social circle for having the best party takeaway EVER.

 

Here's how my jacquard fascinator came to life:

 

Cutting the interfacing:

 

1Interfacing.jpg

Ironing the cut interfacing to the back of the uncut fabric (This way, the interfacing becomes the pattern cutting line):

 

2Fusing Interfacing.jpg

The brim pieces stitched together:

 

3StitchedBrim.jpg

The point of the body, stitched and clipped (I like to leave that little tail to give the point a teeny bit of support - your mileage may vary):

 

4TrimmedPoint.jpg

Clipping the interior edge of the brim once it's turned (you'll find this makes stitching a good bit easier):

 

5ClippingBrim.jpg

Stitching the body and brim together:

 

6StitchingItAllTogether.jpg

Stitching from another angle:

 

7StitchingItAllTogether2.jpg

Hat with stitching completed, awaiting crumple:

 

8HatUncrumpled.jpg

Three of my hats, crumpled and awaiting instructions:

3RumpledHats.jpg



The finished batch of minis! There's seriously no telling how many more of these will come to life between now and Halloween. I'm a hat junkie!

panels 21758.jpg

No TrackBacks

TrackBack URL: https://blog.fabric.com/cgi-bin/mt5/mt-tb.cgi/4211

Leave a comment

About this Entry

This page contains a single entry by Holly Frey published on September 24, 2010 9:59 AM.

Rowan Kidsilk Haze was the previous entry in this blog.

Sweater Surgery is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.