Patterns: September 2011 Archives

I love new pattern downloads. Love making them and love launching them. I love today's especially because we have heeded your call and Fabric.com and I are proud to present our first Crochet Free Pattern Download: Ellis Square Cowl and Hat. This is a chunky but open cowl and hat project that is just right for fall. Made with Lion Brand's Wool Ease Thick n Quick; it is warm and cozy without added bulk. Plus when you thread a beautiful ribbon through the top and tie it in a chic bow you have a great hat too. You can work up two to give as the perfect gift. One to wear as a cowl and one as a hat or they can wear both as cowls should it get cooler.

My second Free Pattern Launch is the Tybee Island cover-up. This is the perfect cover-up over swimsuits or shoulders, depending on the season and the fiber used to work it up. This knitted pattern features a leaf pattern worked on each side. You can work it in a chunky wooly yarn for winter or a worsted cotton ( try it in Lion Brand Recycled Cotton ) for spring and summer. The ties at the top keep it secured around your hips or shoulders. This also makes a great gift coupled with a gift card for dinner out and a movie (restaurants and theatres are always chilly).   

 

 

Back when I originally test drove the Hot Patterns Fringe Festival free download, I mentioned that one of the many visions I had for the pattern included elongating it and turning it into a running dress. Come along for the ride as I work on my custom tunic!

Before I did anything with the pattern, I wanted to transfer an image to my fabric. I am making this dress for a 1/2 marathon in Walt Disney World, and I love a little custom flair. Since the Haunted Mansion is my favorite, favorite, favorite ride, I decided to try adding an image from the ride's iconic wallpaper pattern to my lycra. If you've ever made the mistake of ironing lycra, you know it's a no-go (hello, melted mess!), so an iron-on transfer wouldn't work. I decided to try a different approach -- a Sharpie marker.

I used my opaque projector to project the image onto my fabric, and traced it out with a series of sloppy dashes. Since this maneuver takes place in the dark (with the exception of the light from the projector), what you end up with is not going to win any art awards.

After I filled in my design, it was much better. Hooray! Haunted Mansion! If you try this method at home, don't get discouraged if your fabric gets a little distorted or puckers during the process -- a little shot from the steamer smooths everything right out.

Perfect? No. Indentifiably dicey while I'm running in it? Absolutely not. Onward!

Now, on to the pattern ...

I pulled a pattern from my library that I have had for -- no joke -- 20 years. I like it because it's made for knits and has a nice swing to the skirt.

I set the Fringe Festival top pattern on my fabric, and then set the longer dress pattern on top of it. That's it! No magic tricks required. I just cut out the resulting shape, smoothing the transition lines.

I wanted to add a black stripe down each side of my running dress to add a little bit of sport detailing, and also to contrast with the periwinkle fabric I used. (Without the black, it was looking like stretchy scrubs -- NOT the look I wanted!) Once I had the four primary pieces cut, I eyeballed my additional side pieces, cutting them out of a black lycra.

I assembled my six pieces and checked for fit. I made a few minor contouring adjustments at this stage, because while the pattern fits fantastically as day wear, it fit a little differently over the shape created with a sports bra.

To finish the tunic, I cut a 2" piece of black lycra just a little shorter than the circumference of the neck opening. I stitched this piece into a closed loop, folded it in half lengthwise, and stitched it to the neck, applying gentle, consistent tension throughout. Once the neck binding was applied, I stitched a triangle shape at the front of the v-neck to keep that same v-shape for the facing.

Then sleeve binding was attached the same way I did the neck binding, but completely straight, since I didn't have to accommodate the v-shape.

I opted to serge the hem, and call this project done. Ready to race!

Are you thinking of a way to customize one of our free pattern downloads and transforming it with a totally fresh take? Do it! Be bold! For all you know, you may start a new trend.

 

 

 

 

 

 

Blazers are back big time this fall and I am on the band wagon. I love a good blazer but find that they can be a little confining after a few hours. Don't get me wrong, I love the trim fit and smooth lines they provide to a regular jeans and blouse outfit but the trimness can be wearing at the end of the day. But if you make your blazer out of double knit fabric (like our great selection) you can get the trim, clean lines look of a blazer but the feel of a cozy sweater (like pajama jeans for the top half). Knit blazers are hitting the shelves hard this season but they also carry a hefty price tag. Most of the stores featuring knit blazers don't offer them in the colors or details I want. So I made my own, to fit me and my wardrobe.

I used the Kwik Sew Knit blazer pattern (available at Kwik Sew in Misses and at Fabric.com in Plus size). I cut view B but did a pin fitting to make the jacket less boxy and more fitted. The pin fitting took a while, I had to keep going back and adjusting each piece to get the fit right and recut a few pieces (like the back neck) to keep the drape and shape true. It was fun because I have not had the opportunity to fit front panel seams before or to adjust the fit of a project so much. I ended up taking in the jacket a significant amount because the original is so boxy but the stretch of the fabric and the soft hand still make this a comfy (almost loungy) jacket to wear.

I added an additional button (the original features one) and added a bold cream knit trim to just the pockets. I considered trimming the lapel but when I put on the jacket for a final fitting with just the pockets, I fell in love as is. Just the hint of trim, coupled with the cream buttons, was perfect so I decided to stay my trimming urges. Lastly I hemmed the sleeves a little bit longer than suggested because either I have long arms or I like my sleeves a little longer.

Overall I am very surprised by how structured and not knit-like this blazer looks. I am also surprised by how comfy it truly is. My wardrobe has really taken a step up since I introduced this. Now I can continue with my t-shirt and jeans but look like a million bucks and not feel any different.

Check out these other great fabrics perfect for knit blazers:

Interlock knit

Sweatshirt Fleece

French Terry

 

The new Hot Patterns Witch's Capelet free download is the easiest pattern you may ever encounter. It goes together in a snap and uses so little fabric, the biggest issue you're likely to face is deciding how many you want to make. (I went with three.) With just a little fabric, a bit of ribbon, and half an hour, you have the perfect accompaniment to any witch's wardrobe.

First, I made one out of black embellished tulle, which I am IN LOVE WITH. The rhinestones scattered on this fabric make it look so lovely and elegant. I love me some sparkles. This one is so cute I may just wear it over a tee shirt for fun -- long after Halloween is over!

 

 

Fore capelet number two, I went with multicolor spiderweb net. I had no idea that there is a bonus element to this fabric: It's reversible! The backside is all silver webs. So, in the 30 minutes it took me to lay out and cut my fabric, and then assemble the capelet, I really ended up with two of them! So, whether I want to go as a disco witch or throw an icy, classic vibe, I'm covered.

 

For the third iteration of this pattern, I decided to go ghostly instead of witchy, and I love the result.  I used white chiffon, which I steamed while it was twisted to add a wrinkled texture. After I cut the pieces, I made a series of shallow snips along the edges and then frayed them gently to add a little texture. With my ribbon tie in place, I'm ready for haunting.

So, what kind of witch will you be this year? Remember, witches don't have to wear all black -- you can layer a sheer black over another color for depth, or go completely original as a pink or red witch. If you combine your capelet with a matching hat (we've got you covered with a free pattern download there, too!), you can be any kind of witch you like!

 

Get the free pattern here -- and get creative!

 

Wow! HotPatterns Bijoux Baby Jewelry Roll is just plain cool. I have long wanted a jewelry roll but have never found one worth the money at any of the big box stores. The fabric was never bold enough and the insides just didn't fit my needs. Boutique stores had a great selection but the prices were budget busting. I was floored when this pattern hit my inbox. I could not wait to get started and the hardest part was picking the fabric. I ended up going with a medium weight patterned linen (like the Timeless Treasures collection) and a textured medium weight home dec solid all pulled together with a light weight cotton in a tonal pattern. I was very pleased with the color play but more pleased with the finish project overall.

#1) The ring holder is just NEAT-O! I love it and don't think I have seen anything like it. I also love the button closure because I am a big fan of buttons. I don't have many rings (Only the cocktail rings displayed here) but maybe I will get some more just to keep on my ring holder.

#2) I am also a big fan of colored zippers so I loved adding even more color by using different colored 7 in. zippers here. The pockets are very roomy and perfect for some of my bigger pieces (large hoop earring are no problem)

#3) Since I prefer 1/2 in. seams, that is what I used and when it came time to fit the lining to the exterior, I added opposing pleats to the center section of the lining. I use these pleats to keep my earring backings from disappearing. They are also good for general keeping stuff in place should you find the need to dress on the go (in the car, bus, subway or a quick change after class).

The HotPatterns Bijoux Baby Jewelry Roll is a fast project and a GREAT gift idea for any of the ladies in your life. You could even swap the ribbon tie for a snap and expand the ring holder to fit watches and give it to the guys in your life as well. 

I am really picking up crochet and with it my appetite increases for projects. I can't remember how I stumbled upon Olivia's Butterfly crochet hat pattern by Valerie Whitten but am I glad I did. I thought I loved knitting hats but crocheting them is right up there. I am still fascinated by the difference in construction between knitting and crochet that each project is even more fun than the previous. This hat was simple but with a detail that really sets it apart. The effortless butterfly detail placed as it is right above the final row takes this hat from basic to amazing. I love how the chains coupled with a single SC add a visual and textural facet that makes this hat just the thing for a precious little girl. It was quick to make as well as fun.

I used a smaller yarn and hook than recommended in the pattern. I have been jonesing to work with our Lion Brand Superwash Merino Cashmere (72% Superwash Merino Wool, 15% Nylon, 13% Cashmere). This yarn was a dream. It was just as soft worked up as it was in the skein (this is not always the case with soft yarns). It did not irritate my fingers while working it up either (something else I have noticed with some blends, they are not so soft when rubbing your skin). The texture and stitch definition were excellent with just a bit of fuzz so you can see how soft it is. The color, Green Tea, is just right for my little one. It was light enough to allow the hat design to be the main focus, not the color, and will compliment many of her jackets since it is not loud. She has been wearing it all weekend and I haven't noticed any itching or irritation from the wool. She really loves it. With the pattern written as it, the hat can fit an adult just by adding more rows. But to fit a child smaller then 2-3, you will want to reduce the increases and rows and reduce the chains in the butterfly too if the child is very small. Since the hat is worked from the top down it is easy to see how big it is and adjust as you go instead of ripping back. This hat will make great gifts for your own children, friends and friends' children. It is a great pattern that can be worked up with ease and speed.

Raveled here

For a long time, I avoided any project with buttons holes for one reason: I could not make them neat. As hard as I tried buttonholes always threw off my projects. I could spend hours knitting something perfectly but when it came down to the buttonholes, it ruined the whole piece. Happily, I was not alone in my dislike for buttonholes and they have come a long way since I began knitting. Let me share with you some of my favorite methods to create great looking and hard working button holes.

 When I pick up a button band or I need to knit horizontal buttonholes into a project, I go with this method. It is fast, easy and secure. The finished look is very clean and symmetrical. I love that it is all done in one row since I have a past of forgetting to cast back on for 2 row button holes and so I spend lots of time unknitting.  One Row button hole:  http://www.youtube.com/watch?v=EY4vBzLo-Xs.
Amy, from Knittinghelp.com has helped me through many issues with her helpful videos and no less so with this one. She recommends you write down the instructions but I have found a printable version here http://www.knittingdaily.com/glossary/one-row-buttonhole.aspx

So our costume is complete and a huge hit but it was a tricky week of sewing, readjusting and hiding from curious eyes that once they have spotted a Lion Costume can't wait to wear said lion costume. I made my little girls Kwik Sew Lion Costume from dark and light purple fleece and it is so soft and delicious. The fleece was a pleasure to sew with my walking foot. Of course, I did have to stop every half hour of sewing and de-lint my machine but it was sooo worth it. Now for the breakdown:

The pattern went together very easily for the most part but I did have trouble with the paws. My work around was to trace the paw pattern piece onto another piece of paper and then cut out the paw pieces from the fleece, not using the sew-on method recommended in the pattern. Then cut out the paw pieces from the traced paper and use it as a stencil/placement guide and with fabric glue (or you can use a glue stick), tack down the pattern pieces. Then zig zag around the edges of paw pieces. This eliminated the paper mess with little bits of tear-able paper under every stitch and made it much easier to cut out the paw pieces since you are doing it before hand instead of afterward. I also hemmed the bottom of each leg so I could let them down further down the road instead of the elastic. This also makes it easier for my little one to get into the costume herself. I added a zipper in a contrasting color to make it easier for her to find and zip up. Lastly, I assembled the fringe on the tail and sewed it on after I sewed and turned the tail. The fringe was too bulky using the pattern assembly. I hand sewed it in place which made it much easier, no broken needles and the finish was just as neat as the original. I am going to go back and lightly stuff the tail and add some pipe cleaners so I can shape the tail for Trick or Treating so keep it off the ground and give it some life.

Some other modifications I considered were adding the bow from the bunny variation and some flat piping around the chest piece. The reason I decided against them was that the costume was so stinking cute that I didn't think it needed them and would have been lost on the costume.

Stay tuned for Parts 3 & 4 which will feature easy shoe covers to make your costume flawless and a great Pumpkin Pail Cover to match your costume and complete your Halloween Look. Find Part 1 of our Child Costume series here and check out our great Fleece section for your kid's color combination dreams-come-true!

I remember when I first discovered I was pregnant with my now 2 yr old daughter and bragging to my husband that I would always make my daughter's Halloween Costume. 2 years in and I have stuck to my guns (though that is only 2 costumes so far- year 1 & year 2). This year, I am taking it to the next step and making a full costume using Kwik Sew's Babies and Toddler's Costume that features a Bunny, Bear, Dinosaur and Lion. My little one is crazy about all of these creatures but has a special fondness for lions so I am working on that one. As simple as it may look, making a costume for a toddler is not a 'jump-in' project. This needs some planning and consideration. First you need to know that this is not just a costume to your baby or toddler. Whether or not they understand the concept of Halloween and costumes, reason stands that all that will go out the window once they try it on for the first time. No, this is no costume to your kid, but an everyday outfit (fit even for the fanciest of places...the grocery store). FACT: this costume needs to last. Given that last bit, that means you need to bank on your baby or toddler growing so proper measuring is key.

You can clearly see my marks here with a bit of extra art thrown in for marketing. 

You will need to start by measure your kid now and then adding a year's growth to that (this takes into consideration that this costume will not fall out of favor until next year's new costume is unveiled). You don't want to just estimate here either because patterns take growth as a factor too. You need to make sure you start with the right measurements to end with the right size. To measure a wiggly kid is tough but with a door and a piece of chalk it can be easier (chalk can be cleaned right off). Stand your kid against the door and mark above their head for height and stretch out their arms and mark for arm length. These 2 indications are prime growth areas. You can measure the door while your kid is playing somewhere else with less wiggling. Measure from the ground to the height mark and from the end of the mark to just under the height mark (if you drew in the measurement lines it would make a cross). If you can, quickly measure the tummy, chest and head). I like to do this while she is drinking because her speed is greatly reduced at this time. These are not as critical but are helpful since the tummy is usually the widest area, you don't want the costume to be tight on the chest and this is a big growth area, and the head is a key complaint area for kids.

Better with the arms down but you work with what you've got!

Compare these key measurements to the back of the pattern envelope as your starting point and go with the next size up. If you are spot on with the size recommended for your size, great but not every kid grows at the same rate. You don't want a too small costume before it is time to make another and you don't want your child tripping to every house in the neighborhood. Start right to save yourself some trouble and make for one happy kid this October through October.

You can find more costume patterns here on Fabric.com